Search results

I had a request for my hyd brake kit so I made another run of 12. I have 6 left. Used any trailing arm master, caliper, rotor and parking brake cable. A hose from any 4 stroke Yamaha is also needed as the trailing arm hose is a little short. My bracket and hardware mounts the caliper. The...

New bracket build. Nobody races a 750. lol opsled

Looking for 1 Hauck 8397 P685, 68.5mm piston for a 750. Thanks, Phil (opsled)

This idea has been in my brain for at least 5 years (maybe more). I see it in my dreams and the picture has been clear but I've never gotten (made) the time to do it. Finally put some stuff on the burner and got it done. Others have made HYD conversions for the Mighty 4 using many different...

Came off a 92-4. Should also work on the 5-600 TSS Max's. Works good. Could use a cleanup and paint on the master. Does have a parking brake paw on the lever. The original brake mechanical brake handle was modified and used with it to provide hi-lo beam switch. There is a brake light switch in...

As stated. Pipes are used but in good shape. There are some dents but nothing that will effect performance. Flanges with new springs and spring tabs included. $400 plus shipping. Box will be 34X24X16 in and weigh about 32lbs packed. Will be shipped from Burlington Wi 53105 if you want to...

I have some fish I need to fry and something needs to go so,,,,,, I'll just post the link. http://cgi.ebay.com/ebaymotors/?cmd=ViewItem&_trksid=p3984.m1586.l2649&item=190660514459&sspagename=STRK%3AMESELX%3AIT This is one great sled and I hate to see it go but I have some health issues I...

Have a some extras I could let go if anybody has a need. 1 maybe 2 pair. The two sets on the left have mounting hole issues (holes are bigger than they should be) but wouldn't be hard to fix. All would need cleaning and polishing but Turch said he'd run right over and do em for ya in exchange...

http://madison.craigslist.org/rvs/2801582407.html Been some here looking for a set. These are not mine. opsled

They are still on my 92. I am going to try a set of PSI quads on the old hound and if I like them these twins might be available. They are in real nice shape and the silencers were repacked (by me) less than 300 miles ago with FiberFab ceramic packing. The noise level is not much louder than...

Local 500fter coming up this Sunday. Might be a mud bath (we'll see). I go every year but am always working in the pits helping out others and BSing. I've never dragged my 4 so this is new ground for me. Stock 92 with Bender Twins an stinger. Talked with Tony on what I have for go faster...

Carl and Nytro arn't far from me and asked if I would put their 800 engine together. Sure. It showed up extremely well packed in a box but dissassembled. Story is 1200 miles, wrecked sled, engine taken down oiled and put into storage. I believe. Everything looked in near new condition and was...

I love my 92's but???????/ I couldn't wear this. http://milwaukee.craigslist.org/rvs/2764883806.html opsled

I just listed this silencer on ebay. It does need work but is repairable. Good Luck, opsled http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=190203673153&ssPageName=STRK:MESE:IT&ih=009

Well we finally got decent snow here in SE Wi and the boys wanted to go for a ride. My youngest just got done with putting together a 78 Exciter that I bought for $25 and wanted to take it out for a spin and my 92 hadn't seen snow since it's rebuild and maiden voyage in March of 06. The RX is my...

I am selling these on ebay. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=190196634567&ssPageName=STRK:MESE:IT&ih=009 http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=190196589448&ssPageName=STRK:MESE:IT&ih=009 Good Luck, opsled

I have just listed 2 Comet clutches on ebay. One is a NOS Yamaha/Comet 102 for 83-91 Vmax 540 sleds (item # 190165924978 ) The other is a very good used 102 Comet replacement clutch for an 81 SRX (item # 190165947309). Thanks, opsled __________________ I reserve the right to change my mind if...

I have recently aquired an 802.5cc tripple built out of 2 Vmax 540 engines. It was never finished but the build was started with 2 NOS cranks and crankcases. I have got way to many projects going so I have decided to let this one go. I have listed it on ebay (item # 190157948123) and it starts...

Just listed an NOS belly pan for 340-440 Exciter's, 340-440 GPX's or 76 SRX on ebay. Item # 190149076832. Auction starts tonight at 8:30 central. $50 opening bid no reserve. opsled

Item # 190144368839. Cylinders, pistons, head, carbs, match ported intake boots and exhaust flanges with gaskets. Bring that Vintage Vmax back to life, scare some 600's and look stock while doing it. opsled