93 vmax 4 750 engine in reverse

mooseman

New member
Ok bought a 750. Needed a piston and cylinder. Replaced them, drained fuel, added fresh. Took apart and cleaned the carbs. Everything back together. 120psi per cylinder.

Problem is the damn thing only runs backwards, she fires up and idles great but the engine is going in reverse.

It will pull the recoil clean out of my hand. Could the crank be so out of phase that it's reversed now or is this a timing issue.

If I messed up the coil wires would that cause it to fire at the wrong time?


Sent from my Nexus 6P using Tapatalk
 

mine did the same thing and the crank was out had to weld it
Thx. I figured it out, posted in the general questions area.

Some idiot before me installed the coils on the opposite sides they were supposed to be.

Sent from my Nexus 6P using Tapatalk
 


Back
Top