Search results

I need; tall primary clutch cover 49-43 helix for 800 secondary Vmax4 silver 800 sec. Spring Thanks

There is a wahl asphalt skid,skis and track on Detroit Craigslist.

How do u measure studs or determine size of stud while they are still on track? I want to replace about 35 studs on my track that are slightly bent or damaged. I would like to replace them all but the cost to replace 200 studs around $4-500!!! Track is off sled so I want to do it now. Also...

I am upgrading my 750 to 800 chaincase and secondary. I have my choice between an 800 stock clutch or a roller clutch. What should I choose for a trail and lake sled? What are the benefits of a roller clutch?

Just traded my CR 250 for a 250 enticer and enclosed trailer. Will miss my dirtbike but needed the trailer and kid loves the sled. Carb needs to be cleaned though starts up but doesn't idle very well with the choke off anything I need to know about cleaning the carb on this?

Going to look at a little 250 enticer for my son. Is there anything I should look out for on one of these? One thing that bothers me is it has a k+n filter onit. Owner said he installed it cuz the rubber boot to airbox was rotted. Is this a concern?

I can't stop dismantling my sled. With the chaincase removed when I spin the secondary it freewheels fine but makes a noise like thud, thud, thud. Also, if I grab the shaft on the chaincase side and change rotational direction back and forth forcefully it makes a metalic clank. (93 750 12,400...

I have a good friend who has access to acid dipping at work. He said this can make the exhaust pipes like new. My ? Is will this damage the pipes in any way? Can u do this to the flanges that bolt to the head and will it mess up the silencers. These are psi quads. There is a lot of oil also...

After removing the cover I was surprised at how good the inside of the case looked. But after closer inspection I noticed two broken links in the chain. The gears look fine to me but it is the 1st set I've seen. Anyway, my question is; Can I just replace the chain and leave the old gears? I will...

Great guy to deal with. Parts were all as described. Price was great ,too. The only problem I had was having to sleep in the doghouse because when my wife opened up her box of flowers she thought were from me, she got a drive belt and an axle.

Decided I would rather spend my summer working on my 93 750 than a kawasaki 440, even though it is a cool sled.After looking at it closer I beleive it would be a good parts sled or needed to be completely restored in order to ride. The compression was 125/135psi.It will start and run but the...

If I shake the clutch that is connected to the shaft to chaincase the shaft moves nearly 1/16th of an inch. I assume this bearing is bad. The other issue is the shaft looks like there is a deep groove in front of the bearing. is the shaft supposed to be completely smooth or is there a machined...

I am looking for a first sled for my son. Saw a nice one for $300. Is this too much sled for a 10 year old? What is the power and top speed like? He has never driven a sled. He does have a CRf 50 he rides in the summer. Is there a way of governing the throttle if it is too much? Thanks for...

Check this out. A turbo in the back of the sled. This sled was extremely fast. It was hanging and beating full on drag 900 cats that had there cooling system in an actual cooler.

Have any of you guys ever owned a phaser or a excitor I have a friend looking on craigslist for a good reliable cheap trail sled any information is appreciated.

What is the proper Procedure to do a compression test? What are acceptable readings? If they are low, do you just install new rings?

Has anyone ever owned one of these? I just put a deposit on one that has been sitting for years but is real clean for its age. Apx 1800 miles on odo. I did a compression check and results were 124,135. Gave $200, with another $150 due if it runs with no major problems. Waste of money or not?

2:00 pm on sat and sun this weekend on white lake mi. There are snowmobile ice drags, 4 wheeled and dirt bike racing also

Just got back from Drummond Island the trails were awesome, sometimes I was the only person on them on freshly groomed trails for over an hour. lots of twists and curves and turns out there but are areas especially near the dolomite mine where you can go wide open for 5 miles at least, the trail...

Borrowed my Neighbors grease gun and he wants it back. Anyone know how many grease points and where they are on the suspension?(zerv fittings). I could only find one.