F/S or trade cylinders
- Thread starter Nytroman
- Start date
Apsley Max
Member
pipes
Which pipes did you have in mind?Twins or quads? I have bender twins to get rid of, with the silencers.
Which pipes did you have in mind?Twins or quads? I have bender twins to get rid of, with the silencers.
Apsley Max
Member
pipes
I felt a good increase, and yes ,sorta loud with bender silencers when on throttle. Not to loud at idle.sound great.
I felt a good increase, and yes ,sorta loud with bender silencers when on throttle. Not to loud at idle.sound great.
vmax4rules
Dimebag Darrell RIP
From what I have gathered the Bender 750 twins are a copy of the Yamaha stock 800 twins.
Apsley Max
Member
pipes
I ran stock jets ,50 pilots,135 mains.Coldest day of the year at sea level.Stock clutching 89a-10, with 3.1 rivets in both holes.Quite a noticeable increase.I paid 325 for them and 150 for stainless silencers.I was told I paid to much, but so what. I paid almost 800 for psi quads after all was said and done, to get them here.What kind of shape are the barrels in??? How many?How new?This seems to good to be true hahaha.My pipes are mint.No repairs neccessary.The only thing I don't like about 93-94 barrels is the intake port bridges are so thin, and I've seen some cracked ones,right at the point where lower ring stops at bottom dead center.92 barrels are thicker here.How are these,Never been repaired??? Where are you located??? So many questions eh??? Sorry
I ran stock jets ,50 pilots,135 mains.Coldest day of the year at sea level.Stock clutching 89a-10, with 3.1 rivets in both holes.Quite a noticeable increase.I paid 325 for them and 150 for stainless silencers.I was told I paid to much, but so what. I paid almost 800 for psi quads after all was said and done, to get them here.What kind of shape are the barrels in??? How many?How new?This seems to good to be true hahaha.My pipes are mint.No repairs neccessary.The only thing I don't like about 93-94 barrels is the intake port bridges are so thin, and I've seen some cracked ones,right at the point where lower ring stops at bottom dead center.92 barrels are thicker here.How are these,Never been repaired??? Where are you located??? So many questions eh??? Sorry
Apsley Max
Member
pipes
Sorry I dont have a camera.This may not work out do to this fact.Where are you located?
Sorry I dont have a camera.This may not work out do to this fact.Where are you located?
POWERSHACK
New member
Nytroman said:
Would that be a red 96 vmax-4 ???
Have you went to the race in Ankeny before ??
POWERSHACK LEIGHTON ,IA.
SORRY I DID NOT SEE 93 750 !!
RACE THIS YEAR IS AT TODDS AIRFIELD ON DEC. 9th .
Last edited:
POWERSHACK
New member
Nytroman said:
Yes , maybe 3 years ago at the ski resort, can not think of the name.
They had that big bump in the track around the 475' mark.
And my butt has about 2' off the seat at over 95 mph.
and back on the trailer for me !!!!
powershack
Apsley Max
Member
off line
Im so sorry for not replying, but I havent been hooked up at new house for a couple weeks, and wife says i may not be for a while yet.But i just picked up a complete 94.I think Im going to keep them for this.You should have no problem getting rid of them.I know if i needed a set , I'd pay 150 a jug, maybe more.Anyway , sorry again.
Im so sorry for not replying, but I havent been hooked up at new house for a couple weeks, and wife says i may not be for a while yet.But i just picked up a complete 94.I think Im going to keep them for this.You should have no problem getting rid of them.I know if i needed a set , I'd pay 150 a jug, maybe more.Anyway , sorry again.
RDL 93 V-MAX4
Vmax-4 Senior Member
Hey Nytroman!
I have my 93 750cc motor all apart right now. So I was thinking that 4 new jugs would be better than what I have right now. Let me know if you have Pay Pal for payment? Also I will PM you with my addresse for shipping to Ontario, Canada.
I have my 93 750cc motor all apart right now. So I was thinking that 4 new jugs would be better than what I have right now. Let me know if you have Pay Pal for payment? Also I will PM you with my addresse for shipping to Ontario, Canada.