wanted bender can

[marc8_2]

looking for used bender exhaust can for 750-800 twin pipes

 

[rustman]

Im not sure if you know or not so I'll just throw it out there but Hauck still makes them new as well as Full power performance.

http://www.fullpowerperformance.com/index.php?option=com_content&view=article&id=73&Itemid=115

http://www.hauckpowersportsinc.com/pages/CustomCatalog/Product/24761

Might be an option by the time you factor shipping and cost for a used one and the repairs the used one will most likely need.

 

[marc8_2]

Thanks rustman I was hopping to find a used one for less then a new one
would anyone have video's of the different sounds for different can's

 

[Roadrunner]

Here is my 93 with a Bender stinger on it - http://www.youtube.com/watch?v=8l2r...xt=C368536cUDOEgsToPDskJaIbbf1x_KTXxR4e0CBdVH

Also here is my 93 with PSI quads - http://www.youtube.com/watch?v=Uq_e...xt=C30c09b7UDOEgsToPDskLcFBdFUbgLdOLTtG0mkdQQ

 

[ALLSEASONRIDER]

Good luck finding one Marc...I have been looking for a while as well. Pretty hard to find a nice one used and $300 for a new one is pretty steep..

 

[opsled]

Here's my 92 stocker mowin grass. Bender twins and can. Stingers were repacked with ceramic fiber.

http://s808.photobucket.com/albums/zz10/op1961/?action=view&current=227.mp4

opsled

 

[marc8_2]

Opsled I really like the sound of your machine:rockon:

 

[bubbaj92]

hey opsled that thing sounds good! nice sound man, why are you sellin that setup? and where did you get them running boards?

-Bubba

 

[opsled]

The ones I have listed are not the ones on my sled. I have two sets. The preproduction sled I bought had Bender twins on it when I bought it but a stock can. I did some horse trading to get another can so now I have two sets. I have a set of PSI quads I want to try on mine and may also sell the Bender twins that are on my sled if I like the PSI's.


We have two sleds torn down here now. The 880 Bender sled and the preproduction OMUO sled.

The OMUO is going back together with all stock 92 parts.

The 880 is going back together as is but probably not as an 880. Will probably bring that one back down to somewhere between a 750 and 800 for better reliability and cost.


I also have another chassis we may build for drags. If we do then my 92 stocker will keep the twins and just be used for trail.

I want to leave my options open for now until we work through these projects but didn't need two sets of twins.

Running boards?? Not sure what you mean. That sled is stock with the Bender twins. The tunnel has been stripped and polished.

opsled

 

[bubbaj92]

oh gotcha! i was lookin at the video link to photobucket. looked like you had some different foot boards on it. heck i dont know im new to v4's and i know it looked different than mine just thought you might have replaced it.