Recent content by AK MTN VMAX4

Lots of Vmax4 parts for sale, airboxes, carbs, plastics, crankcase with crank, track, front shocks, complete rear suspension, aluminum skis, seat, stator, headlight pod and instrument cover, gauges, oil tank, Fuel pumps, rear cooler, running board coolers, radiator, and shroud for radiator, foot...

I have a red 94 Yamaha Phazer that had a blown motor (threw a rod) I just got done putting a 540 fan motor out of a Viking used the stock phazer pipe, had to mod the y-pipe using part of the Phazer y-pipe, I modified a pair of flatslides of a 96 Vmax 600 used the stock phazer 143.8 mains and...

A few years ago my Dad and I went out towards Sleeping Lady Mtn in Alaska they had sat there for about 10 years not running. So these things have not ran in about 10-15 years. The 433 has a kinda rusted out tunnel, both need windshields and seats. The 433 needs skis. The cowlings are in pretty...

I have a 1995 Vmax4 that was a short track before this weekend. This weekend I pulled out the 121 and cut 10 in of another skid and welded that part onto the end of my Vmax4 rails and did a kick up on the rear of rails about 1 in, lengthened it to about 141 then moved the suspension back and...

I have a 1995 that I just stretched to a 151 in track I still have the 24-37 gears in it 1.54:1. I need some gears closer to a 2:1 ratio. I need the wider gears in 1995 they went to the wide gears on the Vmax4s. I would like some where around 20 top and 40 bottom. Please respond asap as I am...

I am looking for more info on the RX1 Eastern Cycle Performance Kit including spark plugs, air filters, prefilters, 165 mains, Holtzman Carb springs? Heard it gave about 16 hp in the midrange? What about at peak? What does this kit cost? Anyone using it in deep powder, if so hows it working for...

Hey everyone lookng for a set of quad or twin pipes and reeds for a 95 Vmax4Let me know if you have any they need to make more torque and power than stock. I would like to have PSI but anything that makes more power and torque all rpms especially in the bottom end Does anyone have a dyno...