Removal
The removal was straight forward, it took approx 2.5hrs nice and slow field strip.
lt can be done by one person but 2 would be easier.
My manual told me to disconnect the oil lines from the oil pump, my oil lines are crimped on wth metal clips. l unscrewed the pump itself.
Note there is an o ring in the oil pump, as you can see in the 1st pic mine came out in 2 peices.
Where the rear mounts fit i scribed around them before removing the engine (2nd pic), this will hopefully help me get the motor back near the right place and make final setup a bit easier
l did not remove the primary or secondary clutch. Though you dont have to remove the primary to remove the engine, you will have to take it off to strip down the engine. lf leaving the secondary in place, use caution as you ease the magneto cable past the brace.
lm also going to replace all fuel and oil lines