Are there Aftermarket bearings for skis?
- Thread starter dgkatz
- Start date
mjdevries
New member
If you can measure one, go to this website and type in the IDxODxLength and see if anything comes up.
http://www.vxb.com/Merchant2/merchant.mvc?Screen=SRCH&Store_Code=bearings
I checked one that I have and it has 1414 on the side of it and checks to be a 14X20X14 bearing. I do not have any new ones from yamaha, but the old one I checked didn't appear to have any seal, but these ones have seals. They are still $5.95 each, but that's better than Yamaha's $20 each. It will still set you back $72, plus $13-14 shipping. It's better than the $240 from Yamaha.
http://www.vxb.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=Kit7510
http://www.vxb.com/Merchant2/merchant.mvc?Screen=SRCH&Store_Code=bearings
I checked one that I have and it has 1414 on the side of it and checks to be a 14X20X14 bearing. I do not have any new ones from yamaha, but the old one I checked didn't appear to have any seal, but these ones have seals. They are still $5.95 each, but that's better than Yamaha's $20 each. It will still set you back $72, plus $13-14 shipping. It's better than the $240 from Yamaha.
http://www.vxb.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=Kit7510
Last edited:
Apsley Max
Member
NTN part#1414L They are 6 dollars each.I put 3 in the top connection,on both sides.When you install them, make sure seal is on the outside.I use my piston pin puller to do them.There is also another number on the box 180504.Any bearing supplier can get these.