RPC Pro Stock starter kit

mistermax

mistermax

New member
Morning guys,
I have acquired a set of RPC pro stock 10,200 race pipes with 4 TM flat slides and RPC 180 box with proper chip. I dont know much about them but came from a reputable member. They came with much other stuff.
1,000 firm Wixom mi

Kirk
 

Attachments

  • image.jpg
    image.jpg
    47.6 KB · Views: 410
  • image.jpg
    image.jpg
    46.8 KB · Views: 410
  • image.jpg
    image.jpg
    47.4 KB · Views: 408
  • image.jpg
    image.jpg
    48.3 KB · Views: 408
  • image.jpg
    image.jpg
    42.2 KB · Views: 408
Better pics?
 

Attachments

  • image.jpg
    image.jpg
    53.1 KB · Views: 412
  • image.jpg
    image.jpg
    52.6 KB · Views: 411
  • image.jpg
    image.jpg
    51.3 KB · Views: 408
  • image.jpg
    image.jpg
    49.9 KB · Views: 407
  • image.jpg
    image.jpg
    47.6 KB · Views: 406
By the looks of the CDI plug that setup is for a 750 harness.

Also looks to be in GREAT! cond. Should be worth the price.

opsled

PS, I had a 92 heavy mod here (6-8 years ago) with an 840 RPC setup that I did some tuning on and eventually sold for it's owner. It had all the same parts with exception of roundslide bored 38's.

That thing was bad assed fast. Ran mostly 1000 Heavy Mod but could get into 800 at some events. When it was dialed right he was almost always in the finals and usually the sled to beat. One of the few sleds I saw of that era that could handle the Marchbanks cheater Doo's. Had full play back on egt's, rpm and jackshaft speed that he could download and graph on a laptop. Graph (and the pilot) attested that it would keep pulling (hard) well past 11 g's. A couple pics of the old warrior.



 
Last edited:
Bump. would like to sell together. Buy the pipes for $800 get the carbs and 180 cdi for free... the carbs are currently close to a 1,000 alone..
 
Hi, I have the same carbs on a 95 800 I bought last year, and can't seem to get the jetting right (lean). Any idea what main jets are in the carbs, and what needle setting is? I have 660's in mine now and the plugs are still grey. I really don't want to burn this sled down again! The sled is not that radical, trail ported from Bender, Aaen quads, TM38 flat slides, and clutched. Goes like hell, but I don't want to hurt it.

Thanks,
Bob
 
You must log in or register to reply here.


Back
Top