Trying to I.D. Bender Quad pipes

[scott riley]

Can anyone tell me the physical differences between Bender "race" and "trail" quad pipes for the Vmax4's? I've heard one thing may be the "belly" length? Dimensions? Thanks!

 

[INLINE4]

Bender Race Pipes have aluminum flanges and are shorter in length..

 

[scott riley]

OK. What section is shorter? Head pipe? Belly? Thanks for the help!

 

[INLINE4]

Head pipe and belly...

 

[scott riley]

OK. Do you know any of these dimensions or differences in lengths? Thanks!

 

[TJYAM]

Yes I would like to know the difference is. I have a set with aluminum flanges. And are they a 10200 or a 10000. What is the rpm. Thanks.

 

[rbunker]

Does anyone know the hp gain on a set of hauck hauler quad pipes ? And if they are better than psi/aaen?

 

[mark the shark]

Hauck Howlers are dragsled pipes and run well over 10,000 RPM. You can use the Search window at the top of the page and find some information on them, but I haven't seen any definitive answer to horsepower gain.

You can look in the Vmax-4 Snowmobiles Tech section from the main forum page. There are "pipes" sections for the 750's and 800's. You'll find an article comparing different pipes in the 750 section:

1993 DynoTech Pipe Shootout

vmax4.com

PSI pipes are probably the most popular because you get a good horsepower gain with the stock CDI and no crank welding necessary.

Shark

 

[rbunker]

Hauck Howlers are dragsled pipes and run well over 10,000 RPM. You can use the Search window at the top of the page and find some information on them, but I haven't seen any definitive answer to horsepower gain.

You can look in the Vmax-4 Snowmobiles Tech section from the main forum page. There are "pipes" sections for the 750's and 800's. You'll find an article comparing different pipes in the 750 section:

1993 DynoTech Pipe Shootout

vmax4.com

PSI pipes are probably the most popular because you get a good horsepower gain with the stock CDI and no crank welding necessary.

Shark

Could I put a set on a 800 and just jett and clutch it I heard the 800 cranks are good ? Would I need to port the sled?

 

[mark the shark]

There are a lot of guys here who have built race engines that would be able to answer that. Hopefully one of them will see this.

I'm sure that if you called Hauck Power Sports and told them what you are trying to build, they would point you in the right direction:

Hauck Powersports your #1 Yamaha Powersports Dealer.

Hauck Powersports your #1 Yamaha Powersports Dealer in Rice Lake Wisconsin. We are the leader in Yamaha Snowmobile Parts and Yamaha accessories

www.hauckpowersport.com

Shark